RESEARCH OF AXIAL FORCE AND THE TORQUE ACTION ON A DRILL STRING AT ROTARY AND COMBINED DRILLING METHODS
DOI:
https://doi.org/10.31471/1993-9965-2019-2(45)-7-15Keywords:
drill string, torque, axial load, mechanical energy, mechanical work, directional well, S-shaped wellAbstract
The estimation approach of the work performed by the main force factors acting on the drill string, rotary and combined drilling methods, was proposed. The problem of obtaining analytical functions of force factors action for a mechanical system with distributed parameters was formulated.
To solve the problem, the axial load and torque functions of the drill string analysis was performed, depending on the alternating parameter - the well depth. By integrating these functions, analytical dependencies were established for determining the axial load and torque acting on the drill string in sections of directional and S-shaped wells. Relying on industrial data, numerical calculations of the size of work on sections of such wells were carried out. The obtained research results can be further used to find energy-saving modes of the drill string.
Downloads
References
Xiaohua Z., Liping Т., Qiming Y. A Lit-erature Review of Approaches for Stick-Slip Vibration Suppression in Oilwell Drillstring // Advances in Mechanical Engineering. 2015. Vol. 2014. P. 1–17. https://doi.org/10.1155/2014/967952
Pryhorovska T. Rock heterogeneity nu-merical simulation as a factor of drill bit insta-bility // Engineering Solid Mechanics. 2018. Vol. 6. P. 315-330. https://doi.org/10.5267/j.esm.2018.8.002
Голосков Е.Г. Нестационарные коле-бания деформируемых систем / Голосков Е.Г., Филиппов А.П. – К.: Наукова думка, 1977. 339 c.
Pukach P.Ya. On the unboundedness of a solution of the mixed problem for nonlinear evolution equation at a finite time // Nonlinear Oscillations. 2012. Vol. 14, Is. 3. P. 369-378.
Velichkovich A. S., Popadyuk I. I., Shopa V. M. Experimental study of shell flexi-ble component for drilling vibration damping devices // Chemical and Petroleum Engineering. 2011. Vol. 46, Issue 9–10. P. 518–524. https://doi.org/10.1007/s10556-011-9370-9
Сесюнин Н.А. Об изгибе весомого сте-ржня в наклонной цилиндрической полости // Изв. вузов. Нефть и газ. 1983. №9. C.22-25.
Ройзман В.П. О возможности создания безрезонансных конструкций, безкритиче-ских роторов и стержней, не теряющих устойчивости при сжатии // Вибрации в технике и технологиях. – 2015. – № 3 (79). – С. 38-43.
Velichkovich A. S. Design features of shell springs for drilling dampers // Chemical and Petroleum Engineering. 2007. Vol. 43, Is-sue 7–8. P. 458–461. https://doi.org/10.1007/s10556-007-0081-1
Some aspects of design and application of inertial dampers / Dutkiewicz M., Gołębiowska I., Shatskyi I., Shopa V., Vel-ychkovych A. // MATEC Web of Conferences, 178, 06010, 2018. https://doi.org/10.1051/matecconf/201817806010
Velichkovich A. S. Shock absorber for oil-well sucker-rod pumping unit // Chemical and Petroleum Engineering. 2005. Vol. 41, Is-sue 9–10. P. 544–546. https://doi.org/10.1007/s10556-006-0015-3
Levchuk K. G. Engineering tools and technologies of freeing of the stuck metal drilling string // Metallofizika i Noveishie Tekhnologii. 2018. Vol. 40, Issue 1. P. 45–137. https://doi.org/10.15407/mfint.40.01.0045
Introduction to Rotor Dynamics. – http://www.springer.com/cda/content/document/ cda_downloaddocument/9781447142393-c2.pdf? SGWID=0-0-45-1334803-p174512894.
A. T. Tadeo, K. L. Cavalca. A Comparison of Flexible Coupling Models for Updating in Rotating Machinery Response. Journal of the Brazilian Society of Mechanical Sciences and Engineering. Sci. & Eng. July-September 2003, Vol. XXV, No. 3 / 235. – www.scielo.br/pdf/jbsmse/v25n3/a04v25n3.pdf
Зиновьев В.А. Основы динамики машинных агрегатов [Текст] / В.А. Зиновьев, А.П. Бессонов. – М.: Машиностроение, 1964. – 239 с.
А.Е. Сароян. Теория и практика ра-боты бурильной колонны. – М.: Недра, 1990. – 263 с.
Хегай В.К. Управление динамикой бурильной колонны в направленных скважи-нах. Автореф. дисс. на соиск. учен. степени док. техн. наук: спец. 25.00.15 – “Технология бурения и освоения скважин” / В.К.Хегай. – Ухта, 2005. – 45с.
Palmov V. A., Vetyukov Yu. M. Model for the bit-rock interaction analysis / In Fifth International Workshop on nondestructive Test-ing and Computer Simulations in Science and Engineering, Alexander I. Melker, Editor // Proc. of SPIE,
St. Petersburg, Russia. 2002. Vol. 4627. Р. 243-248.
Downloads
Published
How to Cite
Issue
Section
License
Авторські права....
1.png)
1.png){kind=logo}
